Showing 1–30 of 56 results
The 07021.01 is designed for measuring AC/DC currents and voltages; adequate for technical instruction but also for measuring at electro-technical equipment and electronics outside school.
The 07026.00 is designed for measuring AC/DC currents, voltages and resistances. It has its own battery power supply.
The 07027.01 is designed for measuring AC/DC currents and voltages. With the switch selector you can choose all measuring ranges. The multimeter is easy to use, handy and extremely well-protected against overloads and has zero point in the …
The 07036.00 is designed for measuring AC/DC currents. Together with our 07035.00 (link at 07036.00) voltmeter, it is adequate for basic and advanced experiments in the electronics and electro-technical field. With neoprene border (available …
The 07035.00 is designed for measuring AC/DC voltages. With our ammeter 07036.00 (link at 07036.00) it makes a voltmeter set, suitable for basic and advanced electro-technical and electronics experiments at. Because of its large internal …
Power meters are electronic meters intended for measuring active or reactive power in single phase or three-phase networks, with balanced or unbalanced load. The accuracy class is 1.5. The scale value depends on primary values of current
کنتورهای اندازهگیری توان اکتیو، راکتیو و ظاهری و دستگاههای اندازهگیری ضریب توان با مقیاسهای قابل تغییر
EQ0207/2207/0107/2107 و YQ0207/2207/0107/2107
The AR 0101 separate shunt increases DC current ratings when connected to a meter with a moving coil. Connection wires with 0.035 Ohm resistance are enclosed with the shunt.
The dimensions of AR 0105 shunts are adapted to a meter’s connection contacts and can be easily fixed to them with M4 screws. The basic meter is provided with the measuring system 5 mA and measures voltage drop 60 mV. Only a corresponding scale …
Bimetal maximum current meters with a bimetal measuring system are intended for testing the thermal load of transformers, cables, electrical machines, etc. They indicate average rms current value in a setting period of 8 minutes (on request
Combined bimetal maximum current meters are provided with a built-in bimetal system and a system with a moving iron. The meters are intended for testing momentary and thermal load of transformers, cables, electrical machinery, etc. Meters
Communication adapters are used for connecting Iskra electrical measuring instruments, with basic communication capabilities, into network.
The ASR, ASK and WSK current measuring transformers are used for measuring AC currents. The secondary current is 5A, rated frequency from 50 Hz to 60 Hz. The accuracy class is 1.
The 07037.00 is designed for measuring small DC voltages and is suitable for exercises in which pupils use galvanic couples, batteries and low voltage sources. We suggest one instrument for work of two pupils.
The 07038.00 is designed for measuring DC currents and is suitable for exercises in which pupils use galvanic couples, batteries and low voltage sources. We suggest one instrument for work of two pupils.
The 07039.00 is designed for measuring small DC currents. The instrument is quite suitable for experiments in which the zero method is used, for example at Wheatstone bridge. Also it is appropriate for experiments related with inducing. …
DM 310 is very advanced multimeter which gives user precise readings in 4 digits and seperate CT ratio adjustments for flexible systems. It is not only measures the current pulled from the L1, L2, L3, but also voltage and frequency of those lines …
DM 308 – Digital Panel Ampermeter measures very accurately, the current value of the any line (AC+DC) in true RMS. Any line can be measured between 0…9999 A. When the reading excesses 9999 A, it shows Err fault message.
DM 302 – Digital Panel Freequency Meter measure system frequency. Meters show frequency value in 3 digits.
DM 208 – Digital Panel Ampermeter measures very accurately, the current value of the any line (AC+DC) in true RMS. Any line can be measured between 0…9999 A. When the reading excesses 9999 A, it shows Err fault message.
DM 306 – Digital Panel Voltmeter measures very accurately, the voltage value of the any line (AC+DC) in true RMS. Any line can be measured between 0…500 V
DM 202 Digital Panel Frequency meter measures system frequency. Meter shows frequency value in 3 digits.
DM 206 – Digital Panel Voltmeter measures very accurately, the voltage value of the any line (AC+DC) in true RMS. Any line can be measured between 0…500 V.
Energy meters for rail mounting are intended for energy measurement in industrial environments. They can provide information about energy consumption in production plants. They are microprocessor controlled, can communicate with PC …
Our energy meters with power displays have housing for panel mounting. Some of them can also display momentary power in single and three phase systems with balanced or unbalanced loads.
Hour meters show run time of machines, equipment and other devices. When you need accurate information for testing, maintenance or warranty purposes, choose from wide range of HK hour meters.
این دستگاه اندازهگیری به منظور اندازهگیری، تحلیل و نظارت بر شبکههای قدرت الکتریکی تکفاز یا سهفاز طراحی شده است
تحلیلگر کیفیت MC774 دستگاه مهمی برای پایش دائمی کیفیت توان از تولید (بهویژه تجدیدپذیر)، انتقال و توزیع تا تمامی مصرف کنندگان نهایی است که کیفیت نامناسب ولتاژ بیش از همه بر روی آنها مؤثر است.
تحلیلگر کیفیت iMC784/MC784 دستگاه مهمی برای پایش دائمی کیفیت توان از تولید (بهویژه تجدیدپذیر)، انتقال و توزیع تا تمامی مصرف کنندگان نهایی است.
این دستگاه اندازهگیری مختص پایش و اندازهگیری مقادیر الکتریکی سیستمهای الکتریکی تکفاز یا سهفاز است که مطابق با اصل نمونهبرداری سریع از سیگنالهای ولتاژ و جریان مقادیر مؤثر حقیقی را اندازهگیری میکند.