تاسیسات ساختمانی

Showing all 26 results

  • Bistable Switches

    Bistable switches are mainly used for switching of lighting. They are also becoming an alternative to installation relays and contactors. At remote switching of lighting, a parallel connection of pushbuttons is used. In this way, a number …

  • DTS 1, DTS 2, DTS 3, DTS 5

    Digital time switch clock DTS 1, DTS 2, DTS 3, DTS 5 – This time switch clock is used to control various appliances in real time; daily, weekly, monthly and annual mode.

  • Installation built-in device RV 60, RV 120, RS

    They are used as main switches in house distribution boxes or as switches for individual electric circuits.

    Additional colour indications of the position of main contacts red: contacts closed, green: contacts open

  • Installation Contactors up to 63 A IK

    Installation contactors are applied for automatic control of electric devices in installations of dwellings, offices, shops and hospitals. They are particularly suitable for switching, lighting, heat pumps, air-conditioning and similar …

  • Installation contactors up to 63 A IK UL

    Installation contactors are applied for automatic control of electric devices in installations of dwellings, offices, shops and hospitals. They are particularly suitable for switching, lighting, heat pumps, air-conditioning and similar …

  • Installation contactors with manual operation up to 25 A IK-R

    Installation contactors are applied for automatic control of electric devices in installations of dwellings, offices, shops and hospitals. They are particularly suitable for switching, lighting, heat pumps, air-conditioning and similar …

  • MCR 32

    Current monitoring relay MCR-32 – Inside this transformer there is a wire which senses the volume of flowing current.

  • MCR 41

    Current monitoring relay MCR 41- To monitor overloading / discharge ( machine, motor…), load sensing, diagnostics of remote device interrunption, short circuit, current cunsumption increase

  • MCR 42

    Current monitoring relay MCR 42- To monitor overloading / discharge ( machine, motor…), load sensing, diagnostics of remote device (interrunption, short circuit, current cunsumption increase

  • MCR 515

    Monitoring current  relay MCR 515 – To monitor heating rods in shunts, heating cables, consumption of one-phase motors, indicates current flow

  • MCR 53

    Three-phase current monitoring relay MCR-53 – It is intended for monitoring the current in three-phase devices (e.g. cranes, motors, etc

  • Miniature Circuit Breakers RI 120

    Miniature circuit breakers of RI series are used for switching, conducting and switching-off the current not only in normal operating conditions but also in special  conditions in a circuit such as short circuit. They are used for overcurrent …

  • Miniature Circuit Breakers RI 20

    Miniature circuit breakers of RI series are used for switching, conducting and switching-off the current not only in normal operating conditions but also in special  conditions in a circuit such as short circuit. They are used for overcurrent …

  • Miniature Circuit Breakers RI 50

    Miniature circuit breakers of RI series are used for switching, conducting and switching-off the current not only in normal operating conditions but also in special  conditions in a circuit such as short circuit. They are used for overcurrent …

  • Miniature Circuit Breakers RI 60

    Miniature circuit breakers of RI series are used for switching, conducting and switching-off the current not only in normal operating conditions but also in special  conditions in a circuit such as short circuit. They are used for overcurrent …

  • MVR 54

    Relay for monitoring over/under voltage, phase sequence and failure. MVR 54 – supply from all phases which means that relay is functional also in case when one phase is faulty.

  • MVR 54N

    Relay for monitoring over/under voltage, phase sequence and failure. MVR 54N – supply  L1-N, means that relay monitors also failure of neutral wire.

  • NDR-2/A, NDR-2/B

    Programmable digital relay  NDR-2/A, NDR-2/B – Multifunction programmable digital relay with 4 digit red LED display

  • NWT 5

    Level switch NWT5 Relay is designed for monitoring levels in wells, basins, reservoirs, tanks.

  • Residual Current Circuit Breakers FI, NFI

    With a residual current circuit breaker (RCCB) the following protective measures are available: fault protection, protection against fire and additional protection in case of direct contact.

  • Residual Current Circuit Breakers RFI2

    RFI2 is a combination of a residual current circuit breaker and a miniature circuit breaker. With RFI2 the following protective measures are available: fault protection, protection against fire and additional protection in case of direct …

  • Surface mounted (INO) and flush mounted (IPO) compact distribution boards

    Surface and flush-mounted distribution boards apply in domestic and industry architecture for mounting modular equipment for protection (IP40, IP65) against dust and another dirtiness.

  • Switch disconnectors DS

    Used as main and emergency-off switches, maintenance switches or as safety switches.

  • Switch disconnectors DSPV

    Switch disconnectors series DSPV with double breaking system completely fulfil requirements for isolation according to IEC 60364-7-712 for photovoltaic installations. Switch disconnectors are designed to be placed between photovoltaic …

  • Time relays

    Time relays TRE 701 to TRE 706 are suitable for many different applications. They can be one-function ….

  • TZ 220 E

    TZ 220 E Thermostat for monitoring temperature of motor winding